Protect your workers during blackouts and evacuations. Our Glow-in-the-Dark tapes will "GLOW" 6+ hours. This product comes with an aggressive permanent pressure sensitive adhesive that will adhere to most an clean, dry surface.
Tape absorbs any ambient or UV light source, then releases this stored energy in darkness. Our Glow-in-the-Dark tape offers 6+ hours of Glow to the light adjusted eye. Please see data sheets for complete details of specifications and standards.
Red Lens Reflectors ~ 2" x 3-1/2" ~ Sold by the each
• Stick-on reflectors mount to any clean surface
• Low profile - can't be knocked off like molded reflectors
• All reflectors marked with SAE A DOT
• Easy application and long term durability
Our reflectors are designed with highly prismatic lenses secured to a durable transparent resign base. Produced on a clear poly liner, the rolls are easy to work with and the reflectors peel cleanly for application
Each reflector is marked with the SAE A DOT certification. These reflectors are easy to install and are a cost effective alternative to plastic models. Meets or exceeds SAE J592 A.
• Excellent choice for marking anything that requires a high level of night time visibility
• Made using high intensity micro-prismatic surface
• Has a reflective value of over 4 times of our standard grade products
• Intended for application on relatively flat surfaces only
• Meets or exceeds ASTM D-4956 Type III
Road Smart Superbrite is an excellent choice for marking anything that requires a high level of night-time visibility, and with a long term life cycle. The tape has an excellent entrance angularity and high intensity micro-prismatic surface. An aggressive adhesive system that will adhere to most any clean, dry surface. High Intensity product has a reflective value of over 4 times that of our standard engineer grade products.
• Quantity discounts available at 30, 50, 100 and 150 feet
Superbrite is an excellent choice for marking anything that requires a high level of night time visibility, and a with a long term life cycle. The tape has an excellent entrance angularity and high intensity micro-prismatic surface. An aggressive adhesive system that will adhere to most and clean, dry surface. High intensity product has a reflective value of over 4 times that of our standard engineer grade products. Intended for application on relatively flat surfaces only. Superbrite reflective tapes meet ASTM D-4956 Type III and IV.
Striped product is not intended for long-term outdoor applications.
Purchase by the FOOT, 30' ROLL, 50' ROLL or 150' ROLL
• 7 year durability on solid colors
• Assorted colors available
• Custom printing options
• Aggressive adhesive
• Engineer grade reflectivity
• Glass bead technology
• Meets ASTM D-4956-99 Reflectivity Type I
• Quantity discounts available at 30, 50, 100 and 150 feet
Our line of engineer grade reflective tapes offer vibrant daytime visibility with light reflective properties for nighttime use. All solid color tape is rated for use outdoors for a 7-year life span. Tape has an aggressive adhesive that will adhere to almost any clean, dry, smooth surface and meets ASTM D-4956-99 Type I. This product is not intended for vehicle application.
Hazard striped products have a protective lamination to ensure the printed stripe will not wear off. Tape comes with removable release liner. Custom printing, slitting and die cutting conversion also available. We also offer our entire range of reflective products in large format rolls. Striped product is not intended for long-term outdoor applications.
Flexible Engineering Grade (RVG) retro-reflective sheeting is a product manufactured for use as fleet markings, vehicle markings, stickers, decals, etc. Coated with a pressure sensitive adhesive and protected with an easily removable liner, this sheeting is easy to handle because of its great flexibility and is capable of giving high retro-reflectivity.
Best results are obtained when applied to flat surfaces, but it can be applied successfully to corrugated surfaces. It is also used on commercial signs and various labels and highly resistant against the extremes of hot, cold, dry and humid weathering conditions. RVG series retro-reflective sheeting processed and applied properly, shall have a performance life of 7 years when exposed vertically.
Due to the wide variety of applications, we recommend that only professionals with experience in fleet or vehicle graphics install this product. Once installed it becomes very difficult to remove or change and may cause damage to the surface applied to. We are not liable for any damages resulting from the use of this product.
Red & White ~ 11"/7" Pattern ~ 2" wide ~ Sold by FOOT, 30 FOOT ROLL or 150 FOOT ROLL
• Meets DOT-C2 Specifications
• 750+ Candlepower
• Highest night time visibility
Our DOT-C2 reflective conspicuity tape complies with FMVSS 108, DOT-C2, and all product carries the DOT-C2 watermark. Our conspicuity tape reflectivity levels surpass the minimum FMVSS 108 standards by 3-4 times. This product complies with the following specifications: NHTSA FMVSS 108 (49 CFR 571) DOT-C2 (USA), Transport Canada TSD 108 (Canada), ASTM D4956 (North America) and Resolution 132 & 316 (Brazil).
Modular pattern of reflective prisms allow it to be mounted in any orientation while maintaining reflective performance and compliance with DOT-C2. Typical reflective brightness of 750+ candlepower. High visibility in wet or dry weather conditions with full reflective strength from distances of 1,000 feet or more.
Easy-to-apply while offering short-term initial repositionability tape adheres to a variety of surfaces including fiberglass, aluminum and painted steel (ensure surface is clean, dry and oil free before applying). Our new adhesive system allows for an application temperature range down to 32 F (0 C) for added flexibility.
We are able to add your company name or logo to any of our reflective conspicuity tape products, contact us for details.